July 25, 2017

www.process-news.com

Process News Products | Process Newletter Library | View Newsletter Online

R90 GSM SMS Alarm Temperature Humidity Data Logger

GSM series is SMS alarm temperature humidity data logger with LCD display which can measure and record temperature and humidity data of the environment. Meanwhile, GSM series can send alarm message automatically once the setting limits being exceeded and users can dial the SIM card No anytime anywhere to get the SMS feedback of knowing the real-time temperature and humidity. The assorted software can let users finish the setup of data logger easily; such as log interval setting, alarm limits setting, downloading data for analysis etc. GSM series definitely can satisfy all your professional requirements.

  • GSM SMS alarm and built-in light and sound alarm functions.
  • Elegant appearance with Large LCD display.
  • Data logger will send SMS alarm message once the setting limits being exceeded and users can get the real-time temperature humidity data SMS message anytime anywhere just by dialing the SIM card number
  • Stable, reliable and economical.
  • Internal sensor and external sensor type are selectable.
  • Rechargeable Li-battery, USB interface and professional software let setup easily

<<Learn More >> << Another HCS Product >>


 

PDFM 5.1 Portable Doppler Flow Meter

It's ideal for flow troubleshooting, balancing and checking performance of permanent flow meters. The new PDFM 5.1 is fast and easy to operate – you can mount the sensor on the outside of a pipe in less than a minute. Use the built-in keypad and calibration menu to set up the flowmeter for your application. The PDFM 5.1 works on any liquid containing bubbles or solids and is recommended for "difficult liquids" like wastewater, slurries, sludge, chemicals, viscous liquids and abrasives. Measures flow through most metal and plastic pipes including PVC, ductile iron, carbon steel and stainless steel.

The PDFM 5.1 Portable Doppler Flow Meter employs the latest technology in Doppler signal processing. Faster processing, higher data resolution and an improved ability to filter out noise, all combine to produce data accuracy far greater than previously possible.


 

Abaque® Series Peristaltic Hose Pumps

Abaque® Series peristaltic hose pumps are manufactured and shipped from the PSG® facility in North Wales, Pennsylvania. Abaque Series pumps feature a seal-less design that eliminates leaks and product contamination, and have the ability to run dry continuously without adversely affecting the pump’s performance.

  • High performance: Seal-less design eliminates leaks and product contamination, and have the ability to run dry continuously without adversely affecting the pump’s performance, pressure, and accuracy (no slip).

  • Reliability: The Abaque pump has none of the usual parts that create problems on other pumps: seats, valves, mechanical seals. The hose is the only replacement part.

  • Handling of the toughest pumping challenges, including extremely abrasive and aggressive fluids, solid loaded liquids, as well as shear sensitive and viscous material


 

March Pumpen Magnetic Driven Gear Pump Type: MP/MPA

Features

  • Leak-free
  • Ideal for metering applications
  • Self-lubricating hydraulic parts
  • High discharge pressure
  • Low flow
  • Rugged design
  • Corrosion resistant
  • Self-priming
  • Dry running able ( only MPA )
  • Close coupled, compact design
  • Nearby pulsation free flow
  • Ideal for use with frequency inverter
  • Can handle low viscosity liquids

<< Learn More >> << More Vissers Sales Products >>


 

Top Valve Back Pressure & Pressure Relief Valves Now Certified to NSF-61

Primary Fluid Systems Inc. has recently attained certification for its Top Valve brand of back pressure and pressure-relief valves. Available in various sizes, connections, and materials, Top Valve can be customized to systems’ needs. Top Valve is also available in high temperature and high pressure models.

NSF/ANSI-61 ensures the quality and material of products which come in contact with drinking water. It ensures that the product meets all regulatory requirements for the USA and Canada.

Primary Fluid Systems is anticipating approval for its remaining product lines.

<< Learn More >> << Another Primary Fluid Systems Inc Product >>


 

Weatherproof Alarm & Overfill Protection Device

The Model AL201 is ULC listed: CAN/ULC-S661-10 Standard for Overfill Protection Devices for Flammable and Combustible Liquid Storage Tanks AL201 is a family of alarm panels with provision for one to ten inputs and optional relay outputs.

The panel must be mounted in a non-hazardous location. The white pilot light indicates the 120 VAC power. A red pilot light provides the visual alarm indication for each alarm contact. The red light remains on until the alarm condition is corrected. The alarm circuit resets automatically.


 

RD4H-5/8 Extrusion Rupture Disc

The RD4H-5/8 Extrusion Rupture Disc is designed for emergency relief of excess pressure in plastics processing machinery. It is designed to instantaneously rupture at a predetermined pressure.

The RD4H-5/8 Extrusion Rupture Disc has a 4" stem, Hex Head and a 5/8 - 11 NC mounting thread. The RD4H-5/8 is available in a wide variety of burst pressures and is typically a stock item.

  • Burst pressures from 1,500 to 15,000 psi
  • All stainless steel body and disc
  • 5/8 - 11 NC mounting thread

<< Learn More >> << Another OneHalf20 Product >>


 

Classic Wind Speed Transmitter

The low-inertia light metallic cup star and opto-electronic pick-up combine to give a starting threshold of only 0.3 m/sec (0.7 mph). An electronically regulated heating system keeps the ball bearings and rotating parts frost and ice free down to -35°C (-31°F). The instrument is rated for 60 m/sec (135 mph) and 85°C (185°F). The Classic is ideal for process plants required to measure wind conditions. Standard analog outputs connect easily to data aquisition systems.

Our compact wind transmitters have the perfect price performance ratio for most commercial and industrial applications. Their built-in heaters make them serviceable in winter conditions and their standard 4-20mA output signal makes them simple to interface to building control panels or industrial chart recorders.


 

Extruder Rupture Disks

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are designed to provide emergency pressure relief on plastics processing machinery.

Extruder Rupture Disks (Burst Plugs) from ONEhalf20 are offered in a variety of lengths and configurations. Rupture disks are available with burst pressures from 1,500 up to 15,000 PSI.

ONEhalf20 Extruder Rupture Disks (Burst Plugs) are offered with several mounting thread styles that are commonly found on plastics processing machinery.

<< Learn More >> << Another OneHalf20 Product >>


 

Diehl: Series 884 Digital Timeswitch - 24 HOUR & 7 DAY

Compact digital timeswitch which provides precise timing with the flexibility of daily and/or weekly programming. Simple and fast setting by means of push buttons and display prompts.

Features

*24hour/7day timing combined 8 on/off operations daily
*Repeat programs provide up to 56 switching cycles per week
*Minimum time setting:1minute
*Lithium battery provides minimum 5 year reserve (unpowered)
*24 hour display (military or AM/PM)
*Manualoverride
*Skip a day

Applications

Popular applications include: Heaters, filters, pumps, fans, signs, blowers, indoor and outdoor lighting, feeders, security/alarm systems, and process controls.

<< Learn More >> << Another Access Controls Product >>


 

Celesco Low Cost Stringpot

The SP3 from Celesco is a compact, economical stringpot that provides a user selectable 4-20 mA or 0-10 Vdc output signal. Simply install this sensor using the handy mounting bracket and connect the appropriate wires for the desired ouput.

The SP3 is constructed with a rugged, water resistant polycarbonate body that has been compactly designed for tight spaces and generous measuring cable misalignment. With 4 different ranges, the SP3 is a perfect solution for many applications from light industrial to OEM. Just like all of our other SP and SE models, the SP3 is in stock ready to ship.

<< Learn More >> << Another Intertechnology Product >>


 



Process Controls And Instrumentation

We've added a Glossary Of Terminology section, a What's New In Process Controls section, and a Product Video Library section. As well we have updated our Buyers Guide and Company Directory to make it easier to find the products and manufacturers you are looking for.

This news letter from Process News is sent to those who wish to be kept informed of new products via email.

<< Learn More >>