August 22, 2017

www.process-news.com

Process News Products | Process Newletter Library | View Newsletter Online

FuzyPro 6100 1/16 DIN Process Controller

With its improved interface, technical functionality and field flexibility, the FUZYPRO 6100 gives you the best in comprehensive control for most temperature and process control loops.

  • Jumperless Configuration
  • Auto Detected Hardware
  • Process & Loop Alarms
  • Modbus & ASCII Comms
  • Auto or Manual Tuning
  • Heat/Cool Operation
  • Ramping Setpoint
  • Remote/Dual Setpoint Options

<< Learn More >> << Another HCS Product >>


 

MantaRay Portable Area-Velocity Flow Meter

The MantaRay Portable Area-Velocity Flow Meter measures flow in open channels, partially filled and surcharged pipes using an ultrasonic sensor. It's designed for monitoring stormwater, sewage, industrial effluent, irrigation water and natural streams. The MantaRay displays and datalogs flow rate and total flow and connects to samplers, SCADA and telemetry systems.

Calibration is simple: enter the pipe diameter or channel dimensions and the MantaRay automatically computes and displays the flow rate and total on its backlit LCD display. Mount the sensor at the bottom of the pipe or channel and hang the IP67 electronics case above the high water level.


 

Walchem W600 Water Treatment Controller

Take Control Now and Connect with the Best!

The W600 series provides reliable, flexible and powerful control for your water treatment program.

  • Large touchscreen display with icon based programming makes setup easy
  • Universal sensor input provides extraordinary flexibility; the same controller can be used with almost any type of sensor needed
  • Optional dual analog (4-20 mA) input for Fluorometers or nearly any other process value
  • Multiple language support allows simple setup no matter where your business takes you
  • Six control outputs allow the controller to be used in more applications
  • Economical wall-mount package for easy installation

 

March Pumpen TEF-MAG 200 Non-Metallic Gear Pumps

MAGNETICALLY COUPLED GEAR PUMPS Series TEF-MAG:

Corrosive resistant solution for low flow and high discharge pressure applications. Available in ATEX-Execution for zone 1 and 2.

MARCH Series TEF-MAG pumps are rotating positive displacement pumps, external gear type and magnetically coupled. TEF-MAG gear pumps generate low flows with high discharge pressures and approximately no pulsation.

The pump housing is made of resistant solid block plastics like PP or PVDF. The internal hydraulic parts are made of non-metallic materials. The power transmission of drive and pump happens in a contactless way with firm NdFeB or SmCo permanent magnets

So the pump is able to work without any shaft seals, which guarantees save supplies without any leakage of corrosive, toxic and explosive fluids. Pumps for potentially explosive areas in zone 1 and 2, can be made out of PVDF.

<< Learn More >> << More Vissers Sales Products >>


 

Top Valve Back Pressure & Pressure Relief Valves Now Certified to NSF-61

Primary Fluid Systems Inc. has recently attained certification for its Top Valve brand of back pressure and pressure-relief valves. Available in various sizes, connections, and materials, Top Valve can be customized to systems’ needs. Top Valve is also available in high temperature and high pressure models.

NSF/ANSI-61 ensures the quality and material of products which come in contact with drinking water. It ensures that the product meets all regulatory requirements for the USA and Canada.

Primary Fluid Systems is anticipating approval for its remaining product lines.

<< Learn More >> << Another Primary Fluid Systems Inc Product >>


 

Midget Model 277 Pneumatic Indicator

The Midget Model 277 Pneumatic gauge provides an economical way to achieve reliable and accurate tank gauging in vented tanks.

Pneumatic gauges have been used for many years in tank gauging systems requiring remote indication with accuracy and stability over wide temperature ranges.

These gauges are supplied with custom dials, depending on the application. Dial scales may be manufactured to indicate proportional (i.e. E, ¼, ½, ¾, F), litres, gallons, feet & inches, percentage of full and dual scale.

<< Learn More >> << Another Ktech Product >>


 

NaK Filled Melt Pressure Transducers

The RTNAK6S NaK Filled Melt Pressure Transducer is designed specifically for food, packaging and medical processing applications. The Model RTNAK uses a special high temperature fill (NaK, potassium sodium) and an Inconel diaphragm to allow for pressure measurement in applications with process temperatures up to 1,000ºF. The unit features the industry standard 3.33 mV/Volt output and offers pin-to-pin compatibility with all competitor's models utilizing the Bendix style 6 pin bayonet connector.

The RTNAK6S NaK Filled Melt Pressure Transducer comes standard with a 6" rigid stem, and 1/2-20 UNF thread for mounting in standard transducer mounting holes.

<< Learn More >> << Another OneHalf20 Product >>


 

Temperature Transmitter 2-Wire Economy RTD Hockey Puck Style

This is the one transmitter you need to stock for all your maintenance needs. Using your PC and the available software simply program this transmitter for any one of 7 RTD or 13 thermocouple types or customize the calibration linearization at up to 40 points to fit none standard transmitter outputs.

The output signal can be inverted and can be programmed to be linear with temperature or linear with resistance or mV input. Features include a 7mm central hole for easy spring loading of 1/4" tube, insulating barriers between terminals to prevent shorts and a captive cover on programming pins to keep them clean.

<< Learn More >> << Another Enercorp Product >>


 

Melt Pressure Gauge

The ONEhalf20 CTG6S Melt Pressure Gauge is the ideal choice for extrusion processors requiring a simple, reliable and accurate maintenance free melt pressure measurement. This rugged, totally self-contained Melt Pressure Gauge is available in either 0-5,000 psi or 0-10,000 psi ranges. This Melt Pressure Gauge allows the user to benefit from the improved efficiency and quality that goes along with melt pressure measurement at an affordable price.

The ONEhalf20 Melt Pressure Gauge Model CTG6S also offers the advantage of providing the industry standard 3.33 mv/Volt output utilizing the Bendix style 6 pin bayonet connector. This output enables the user to also connect this gauge to a remote panel mount digital melt pressure indicator.

<< Learn More >> << Another OneHalf20 Product >>


 

Strain Indicator Recorder Vishay Model P3

The Model P3 Strain Indicator and Recorder is a portable, battery-operated instrument capable of simultaneously accepting four inputs from quarter-, half-, and full-bridge strain-gauge circuits, including strain-gauge-based transducers. Water- resistant grommets in the hinged cover allow the lid to be closed with leadwires attached. Designed for use in a wide variety of physical test and measurement applications, the P3 functions as bridge amplifier, static strain indicator, and digital data logger.

The Model P3 Strain Indicator and Recorder, utilizing a large LCD display for readout of setup information and acquired data, incorporates many unique operating features that make it the most advanced instrument of its kind.

<< Learn More >> << Another Intertechnology Product >>


 



Process Controls And Instrumentation

We've added a Glossary Of Terminology section, a What's New In Process Controls section, and a Product Video Library section. As well we have updated our Buyers Guide and Company Directory to make it easier to find the products and manufacturers you are looking for.

This news letter from Process News is sent to those who wish to be kept informed of new products via email.

<< Learn More >>