|
Week Of March 27, 2007
|
 |
|
The HRC 15AL control module has dual digital displays providing readouts of both process and setpoint temperatures. Front panel Soft Start, Open Loop (Manual) Control and Closed Loop PID control buttons allow the user to select the function they want, when they want it, which puts you in control of your heating process quickly and easily. The auto-tuning function allows this controller to determine the PID parameters required for the controlled system. This provides precise control for any temperature process. |
FuzyPro Hot Runner Controls |
|
Split And Solid Core Current Transducers Current Transducers Solid Core Sentry 100 Series is used to monitor motors, pumps, conveyors, machine tools and any electrical load where an analogue representation is required over a range of currents. Current Transducer Solid Core Sentry 100 Series models are CSA approved and UL listed. |
AC Split Core Current Transducers Series SC100 converts a monitored AC current to a proportional DC voltage of 0 to 5 Volts. Used to monitor motors, pumps, conveyors, machine tools and any electrical load where an analogue representation is required over a range of currents. All models are CSA approved and UL listed. |
|
Head Mount Smart Temperature Transmitter 4 to 20 mA + HART
The Smar Digital Temperature Transmitter TT421 is a powerful and extremely versatile programmable temperature transmitter, which can be used with practically all relevant temperature sensors as well as with load cells, resistance position indicators, etc. |
The Smar Digital Temperature Transmitter TT421 is the cost effective solution for temperature measurement and control dedicated for head mounting. |
| Hays Fluid Controls Solenoid Valves
|
Hays Fluid Controls Solenoid Valves have been a standard in the commercial washing machine and irrigation industries for decades. Typical applications for all Hays solenoid valves: Commercial Laundry Equipment, Dishwashers, Bottlewashers, Car & Truck Wash Facilities, Irrigation Systems, Poultry Incubators/Watering Equipment, Industrial Maintenance & Repair, Automatic & Remote Steam Control, Boiler Blow Down, Spraying Equipment and more. |
|
Vanton magnetically driven ANSI pumps are ideal for handling corrosive, and hazardous fluids. They are constructed with a dual nonmetallic containment can assembly: PTFE for the inner can in contact with the process liquid, backed by a rugged FRP outer can. This innovative design minimizes troublesome eddy currents. The pump conforms to Hydraulic Institute Standards and offers an air cooled, dry running, tertiary seal. Flows to 450 gpm (102 m3/hr), heads to 280 feet (85 m). |
CGM Sealless ANSI Centrifugals Feature Magnetic Drive |
|
Differential Pressure Gauges
 Now available in Canada exclusively to E & E Process Instrumentation! Leading the industry in accuracy and features. Our product offering includes the Series A family of digital pressure gauges and controls for measurement of low differential pressure with features such as a transmitter output and the ability to read velocity or flow. Other features of the
Series A include universal power, digital calibration, and OptiLink™ programming. For applications that don't have power available or are more cost sensitive, we also offer products such as the S2000 a mechanical pressure gauge.See Complete Product Information | Request More Information |
|
|
Extruder Rupture Disks  Extruder Rupture Disks are designed for reliable emergency relief of excess pressure since they instantaneously rupture at a specific predetermined pressure range.
Skylark Controls model CBP Extruder Rupture Disk is designed specifically for use in plastic extruders. Each assembly consists of a stainless steel body and rupture disk. A rupture disk may be specified for primary relief in applications where pressure buildup can occur so rapidly that the response time of a relief valve is inadequate, such as in a polymerization reaction vessel.See Complete Product Information | Request More Information |
|
|
"Minitwist" - MTFC - Automatic Self-Cleaning Filtration System  “Minitwist” Model MTFC is a fully automatic, self-cleaning filtration system for flows of 0 - 100 US GPM (23M3/H). It removes dirt as fine as 20 micron, and uses a very small amount of water during cleaning process. In filtration mode, flow is from bottomof filter to inside of screen, and out. During cleaning mode, rotating nozzles collect dirt removed from screen by reverse flow, and sends it out through top of filter. Backwash process takes only 5 seconds.• Fully automatic filtration system • Self cleaning, using system water only • Corrosion resistance materials • Easy to install. Inlet, Outlet and Drain • It takes only 5 seconds for backwash • Quick opening clamp for inspection • Virtually maintenance free See Complete Product Information | Request More Information |
|
 Plastic Diaphragm Seals (Gauge Isolators)
The new Chemline SG Series Gauge Isolators are of all-plastic construction available in PVC, Polypropylene and PVDF. The bonnet is of glass reinforced PP for high strength. The diaphragm is dished shaped Teflon bonded to Hypalon offering high chemical resistance and sensitivity. 1/4" and 1/2" gauge connections are available for gauges or any other pressure instrument. |
|
 Continuous Duty Rocking Piston Diaphram Air Pump
The TUF Pump is a 1/20 horsepower, continuous
duty, rocking piston diaphragm air pump for use in pressure or vacuum applications. Its sealed bearings motor requires no lubrication. It can be used as an air supply for bubbler type liquid level controls requiring constant 24/7 operation. |
|
|
Pump Controllers
Use additional contacts to indicate an alarm condition. These alarms provide an audible and visual signal. The audible signal can be muted after which the warning light remains on until the alarm condition is corrected. See Complete Product Information | Request More Information |
Ktech Industrial Products Inc., Pump Controllers are installed to automatically operate a pump to control the level of a liquid in a tank. Pump Controllers are used in conjunction with Ktech Multi-Level Float Switches.
Use two contacts to start and stop the pump. A relay circuit switches power to the fractional horsepower pump motor or to the three-phase contactor of a large pump motor. Similarly, the switch contacts can be used to operate solenoid valves. |
|
BETE Spray Nozzles
See Complete Product Information | Request More Information |
Innovation is a BETE hallmark, and we are proud that over 60% of the nozzles we ship have been customized to meet the specific needs of a customer. Our new rapid prototype machine speeds development of customized nozzle solutions. We can test a prototype nozzle in our laboratory hours after it was designed for a customer. |
|
Rectangular Flanged Inlet Sanitary Positive Displacement Pumps  York Fluid Controls, one of Canada's leading liquid handling equipment specialists, is pleased to release their new Sine® (a Sundyne Corp. Division Partner) rectangular flanged inlet sanitary pumps.Sine® rectangular flanged sanitary positive displacement pumps are designed to handle heavy, sticky, highly-viscous products such as ground meats, fine emulsions, thick, non-flowable base fluids and resins, chemicals, and other sectioned whole muscle mixtures. Patented single rotor design provides low shear and low pulsation, resulting in less smear while maintaining smooth and consistent flow for improved finished products. See Complete Product Information | Request More Information |