Week Of May 8, 2007

FuzyPro 6100 1/16 DIN Process Controller

With its improved interface, technical functionality and field flexibility, the FUZYPRO 6100 gives you the best in comprehensive control for most temperature and process control loops. The 6100 features: jumperless configuration, auto detected hardware, process & loop alarms, Modbus & ASCII comms, auto or manual tuning, heat/cool operation, ramping setpoint and remote/dual setpoint option.

Paperless Recorders & Digital Temperature Controllers

No ink cartridges or paper are required with our new PR20 Paperless Chart Recorder. The bright LCD can represent a conventional paper chart or display graphical or digital trace representations. Six isolated inputs including thermocouples, RTD's, mA & volts can be selected by the user. Since the recorder fits a standard DIN cutout retrofits are straight forward. The Paperless Chart Recorder writes to both floppy disk and internal flash memory.

See Complete Product Information | Request More Information
   

Compensated Mass Flowmeter

The MASS TRIBAR measures pressure, temperature and Differential Pressure directly from the inserted TORBAR primary element and computes compensated mass flow within the integral multivariable transmitter.

The MASS TRIBAR is ideal for the mass flow measurement of liquids and gases. It is also suitable for measurement of saturated steam flow with the transmitter mounted vertically below the pipeline axis.

See Complete Product Information | Request More Information
       

pH/ORP Process Controllers

Walchem's pH/ORP on-line process controllers will improve your treatment performance. With a choice of two models, WDP (Dual pH/ORP) or WPH (Single pH/ORP), finding the optimum control for your application is a snap. Both the WDP and WPH are microprocessor-based with an easy-to-use menu format for programming.  A versatile output configuration allows you to program up to four outputs in a variety of ways with just one controller. The WDP and WPH are available with either on/off mechanical relay outputs or direct pulse proportional control for metering pumps. Installation is as easy as unpacking the unit, mounting it and plugging it in. UL/CSA/CE certified.

See Complete Product Information | Request More Information
 

EchoSwitch Multi-Point Ultrasonic Level Switch From Flowline

The general purpose ultrasonic level switch provides non-contact level detection up to 40' or 12.2m with 3 relays and 1-6 set points. Each relay can be configured on a single set point alarm, two latched set points for automatic fill or empty control or two independent set points for out of bounds alarming.

The switch is ideally suited for challenging corrosive, slurry or waste liquids and is broadly selected for atmospheric bulk storage, day tank and waste sump applications. Media examples include sodium hydroxide and wastewater.

See Complete Product Information | Request More Information
    

Switch-Pro with Compact Relay Controller From Flowline

Installed through the side wall, this general purpose high or low level switch package includes a 10A compact relay controller for pump or valve actuation with an optional flash alarm. The product is typically selected for bulk storage, day tank and process vessel applications. Specify the appropriate sensor technology and material.

See Complete Product Information | Request More Information
    

Is Your Metering Pump Calibrated?

Primary Fluid Systems Inc. Manufactures a complete line of calibration cylinders that are an inexpensive way to ensure that your pump is dosing the right amount of product. It will not only save you money on needless chemical consumption, but help ensure that you are not over or under dosing your line process.

Cylinders are available in a large range of materials suitable for most chemical applications. Standard sizes are:

- PVC: 100 - 20,000 ml
- Polypropylene: 100 - 4000 ml
- Glass: 100 - 10,000 ml

See Complete Product Information | Request More Information
       

Extruder Rupture Disks

Extruder Rupture Disks are designed for reliable emergency relief of excess pressure since they instantaneously rupture at a specific predetermined pressure range. Skylark Controls model CBP Extruder Rupture Disk is designed specifically for use in plastic extruders. Each assembly consists of a stainless steel body and rupture disk. A rupture disk may be specified for primary relief in applications where pressure buildup can occur so rapidly that the response time of a relief valve is inadequate, such as in a polymerization reaction vessel.

See Complete Product Information | Request More Information
   

Cold Air Guns

Cold Air Guns use filtered compressed air (80-100 PSIG) and vortex tube technology to produce sub-zero air for industrial spot cooling. Cold air machining eliminates mist coolants and heat-related parts growth while improving tool life, parts tolerance and surface finish quality.

Cold Air Guns are used in various industrial processes, fabrication, assembly and packaging as a versatile spot cooling device. Most popular applications involve cooling during the machining of metals, plastics, wood, rubber, ceramics and other materials.

See Complete Product Information | Request More Information
       

High Capacity Ball Valves from Chemline Plastics

Chemline HC Series High Capacity Ball Valves are the only truly large port 6" ball valve manufactured to date in PVC, Polypropylene and PVDF. Most others offer a 4" valve with ends increased to 6" size. This valve is suitable for sewage, mild slurry or vacuum lines where an unobstructed flow path is required.

See Complete Product Information | Request More Information
   
Ramsey SonaTech Sonic Level Indicator

The Ramsey SonaTech sonic level indicator can accurately determine the level of bulk solids or liquids in a given bin, tank or other container. The state-of-the-art SonaTech system provides more penetrating power because it operates in the 5-30 kHz range. That means superior performance in dusty, turbulent or steamy atmospheres.

SonaTech Sonic Measuring Systems from Ramsey can accurately determine the level of bulk solids or liquids in a given bin, tank or other container.

See Complete Product Information | Request More Information
   

Melt Pressure Gauges

Melt Pressure Gauges from ONEhalf20 are totally mechanical devices. They offer ease of installation and maintenance. In addition these gauges are ideally suited to processors who require only visual indication of melt pressure.

Melt Pressure Gauges are available in two unique styles. The CTG style features a 6" rigid stem and 30" of flex capillary. The RTG style has only a 6" rigid stem. Other configurations of these two styles are also available. In addition ONEhalf20 also offers these same mechanical gauges with 3.3 mV/Volt transducer output, or either 4-20mA or 0 - 10 Vdc transmitter outputs. These unique gauges feature the standard Bendix style 6 pin bayonet connector and are ideal for processors looking for localized visual indication at the extruder barrel.

See Complete Product Information | Request More Information