|
Week
Of June 4, 2007
|
 |
|
Current to Voltage Transducer CR4310/11 Series is used with process control and industrial instrumentation equipment. The DC output signal can be connected directly to a high impedance analog input of a computer or PLC without additional signal conditioning. |
Current
to Voltage Transducer |
|
Classic Wind Speed Transmitter
|
Precision
wind speed measurement. The low-inertia
light metallic cup star and opto-electronic pick-up combine to give
a starting threshold of only 0.3 m/sec (0.7 mph). An electronically
regulated heating system keeps the ball bearings and rotating parts
frost and ice free down to -35°C (-31°F). |
|
Neptune Mixer
Company offers a complete line of Bung-Entering Mixers. Two styles
for water-like solutions use a folding propeller. Two styles (Series
H & HGS) for viscous fluids use permanent blades and are offered in
higher horsepowers.
|
|
|
Vanton magnetically driven ANSI
pumps are ideal for handling corrosive, and hazardous fluids.
They are constructed with a dual nonmetallic containment can assembly:
PTFE for the inner can in contact with the process liquid, backed
by a rugged FRP outer can. This innovative design minimizes troublesome
eddy currents. The pump conforms to Hydraulic Institute
Standards and offers an air cooled, dry running, tertiary seal.
Flows to 450 gpm (102 m3/hr), heads to 280 feet (85
m). |
CGM
Sealless ANSI Centrifugals Feature Magnetic Drive |
|
Pulsation Dampeners ACCU-PULSE
|
Developed
to remove
pulsating
flows
from positive displacement pumps. |
|
Vortex Cabinet Coolers
Today's small and compact, multi-function
electronic controls, variable speed drives, servos and programmable
logic controllers are extremely sensitive to heat and contamination.
Excessive heat causes components to "cook", digital displays
to misread, controls to drift, and breakers to trip below their rated
loads. The result is often lost productivity from machine or line
shutdowns. |
Vortex
Cabinet Coolers are an affordable, low maintenance, and easy to install
alternative for thermal management of electrical cabinets and control
panels. Using filtered compressed air and vortex tube technology,
Vortex Coolers provide cooling capacities to 5000 BTUH and maintain
NEMA 4, 4X and 12 ratings. |
|
Extruder Rupture Disks  Extruder Rupture Disks are designed for reliable emergency relief of excess pressure since they instantaneously rupture at a specific predetermined pressure range.
Skylark Controls model CBP Extruder Rupture Disk is designed specifically for use in plastic extruders. Each assembly consists of a stainless steel body and rupture disk. A rupture disk may be specified for primary relief in applications where pressure buildup can occur so rapidly that the response time of a relief valve is inadequate, such as in a polymerization reaction vessel.See Complete Product Information | Request More Information |
|
|
See Complete Product Information | Request More Information |
High
Capacity Ball Valves from Chemline Plastics |
|
New
Solids Transfer Pump From Australia Does What No Other Pump Can! |
Supavac
pumps reliably transfer flowable thick sludge, abrasive slurries,
hazardous wastes and dry bulk solids where submersible, centrifugal
and diaphragm pumps break down. They function as an automatic pump
with 25” Hg. suction power and, as the material and operation
demands, will automatically function as a high lift vacuum system
with powerful airflow. |
|
Melt Pressure Gauges
|
Melt
Pressure Gauges from ONEhalf20 are totally mechanical devices. They
offer ease of installation and maintenance. In addition these gauges
are ideally suited to processors who require only visual indication
of melt pressure. |
|
EchoSwitch Multi-Point Ultrasonic Level Switch From Flowline |
The
general purpose ultrasonic level switch provides non-contact level
detection up to 40' or 12.2m with 3 relays and 1-6 set points.
Each relay can be configured on a single set point alarm, two
latched set points for automatic fill or empty control or two
independent set points for out of bounds alarming.