|
Week
Of July 3, 2007
|
 |
|
Custom Control Panels, Temperature Control Panels
|
Custom
Control Panels, Temperature Control Panels for a wide variety of applications are manufactured by Heaters Controls And Sensors. From Custom Control Panels, Temperature Control Panels that
are needed to operate in 60ºC environments, to laboratory controllers that are to maintain temperatures within +/- 0.01ºC. |
|
Electro-Pneumatic Positioner |
The Electro-Pneumatic Positioner YT-1000R
is used for operation of pneumatic rotary valve actuators by means of electrical controller or control systems with an analog output signal of DC 4 to 20mA or split ranges and Limit Switch is
attached internally. |
|
Stainless Steel Pressure Transmitters The ceramic diaphragm sensing element deflects under pressure. the mechanical deformation is converted to an electrical signal by means of a DMS-bridge. An electronic system converts the DMS-signals to a standard 4-20mA signal. |
Stainless
Steel Pressure Transmitters Model PX61 detrermin the pressures in liquids and gases and convert these pressures to an electrical signal. The PX61 features compact construction, and integral
amplifier, large output signal and extensive medium compatibility. For use with ammonia or greon in refrigeration applications specify the -A for amonia or -F for freon option. The design
provides a 1/2% accurate, economical transmitter that can operate accurately over a wide temperature range with corrosion resistance. |
|
A Better Butterfly Valve: Hayward Butterfly Valves up to 12" are rated at a full 150 psi. Unlike other plastic butterfly valves,
Hayward valves are constructed from a one piece body that incorporates fully supported flange bolt holes (the valve has the same number of bolt holds as the matching 150# ANSI flange). This
prevents stressing of the mating pipe flanges. |
Plastic
Butterfly Valves |
| NEW! ChemFlare Connections for Sodium Hypochlorite
|
ChemFlare
connections were developed as a solution to the problems of leakage and failures of PVC threaded and solvent welds on sodium hypochlorite services. |
|
Hayward - Simplex Plastic Basket Strainers |
When pipeline system components
require protection from dirt and debris and the line can be shut down for basket cleaning, a HAYWARD® All Plastic Simplex Basket Strainer is the ideal choice. Unwanted particles are
removed as the process media passes through a perforated strainer basket contained inside the strainer body. The basket traps the unwanted material while allowing the process media to flow
freely. |
|
Corporation Stops
 PFS Corporation Stops have been designed to inject chemical into the center stream of the flow.
|
|
|
Vortex Cabinet Coolers
Vortex Tubes have a very wide range of application for industrial spot cooling on machines, assembly lines and processes. |
Vortex Tubes are an effective, low cost solution
to a wide variety of industrial spot and process cooling needs. With no moving parts, Vortex Tubes spin compressed air to separate the air into cold and hot air streams. While French physicist
Georges Ranque is credited with inventing the vortex tube in 1930, ITW Vortec was the first company to develop and apply this phenomenon into practical and effective cooling solutions for industrial
use. |
|
Extruder Rupture Disks  Extruder Rupture Disks
are designed for reliable emergency relief of excess pressure since they instantaneously rupture at a specific predetermined pressure range. Skylark
Controls model CBP Extruder Rupture Disk is designed specifically for use in plastic extruders. Each assembly consists of a stainless steel body and rupture disk. A rupture disk may be specified
for primary relief in applications where pressure buildup can occur so rapidly that the response time of a relief valve is inadequate, such as in a polymerization reaction vessel.See Complete Product Information | Request More Information |
|
|
Melt Pressure Gauges
|
Melt Pressure Gauges from ONEhalf20 are totally
mechanical devices. They offer ease of installation and maintenance. In addition these gauges are ideally suited to processors who require only visual indication of melt pressure. |
|
Ultrasonic Flow Measurement Granucor DK13, DC13 and MT2109
|
The in-line
measurement of bulk solids flow is important for product quality, process efficiency and system safety. The Granucor system provides continuous, real-time flow measurement of dense phase pneumatically
conveyed bulk solids or of free falling materials. Its non-intrusive design and patented software can be used to monitor and control the flow in pipes or the flow distribution through pipe networks. |
|
Biodegradable Descaler - Dynamic Descaler
Dynamic Descaler does not corrode, pit, erode or have any other harmful effects on materials and metals such as; STEEL, IRON, BRASS, COPPER, PLASTIC, FIBER, TEFLON
or other metals or materials found in water-based systems or equipment. You can clean your equipment IN-SITU (and sometimes without shutting down the machine). Dynamic Descaler has the ability
to dissolve approximately 1.5kg of calcium carbonate scale per gallon in concentrated form. It does not need to be heated up during cleaning. |
 |
|
