|
Week Of August 14, 2007
|
 |
|
Process
Controller - FUZYPRO 6100 1/16 DIN |
With
its improved interface, technical functionality and field flexibility,
the FUZYPRO 6100 gives you the best in comprehensive control for most
temperature and process control loops. Full PID with Pre-tune, Self-tune,
manual tuning, or On-Off control. Heat only or heat & cool. Selectable
from front panel or via digital input, with bumpless transfer. Up to
3 possible, for control, alarm, 24VDC transmitter power supply or retransmit
of process value or setpoint. Process high, process low, SP deviation,
band, logical OR / AND. Also 1 loop alarm for process control security.
Process alarms have adjustable hysteresis. 4 button operation, dual
4 digit 10mm & 8mm high LED displays, optional choice of colours
(Red/Red, Red/Green, Green/Red or Green/Green), plus 5 LED indicators.
|
|
Smar TT300 Series Temperature Transmitters
The Smar TT300 Series is a powerful and extremely versatile smart temperature transmitter. The digital technology used in the TT300 Series enables a single device to accept several types of sensors, wide ranges, single or multiple-ended measurement and an easy interface between the field and the control room. It also includes several interesting features that reduce considerably the installation, operation and maintenance costs. The transmitter accepts two channels, i.e., two measurements. This reduces the cost per channel. |
The Smar TT300 Series is a transmitter
mainly intended for measurement of temperature using RTDs or thermocouples. However, it can also accept other sensors with resistance or mV output such as: pyrometers, load cells, resistance
position indicators, etc. |
|
Digital Temperature Transmitter Digital temperature transmitter features include a 7mm central hole for easy spring loading of 1/4" tube, insulating barriers between terminals to prevent shorts and a captive cover on programming pins to keep them clean. |
Digital
temperature transmitter, this is the one you need to stock for all
your maintenance needs. It can be programmed using your PC and the
available software for any one of 7 RTD or 13 thermocouple types
or customize the calibration to fit none standard transmitter outputs.
The output signal can be inverted and can be programmed to be linear
with temperature or linear with resistance or mV input. |
|
Waterproof pH600 Series Handheld Meters
Store up to 500 data sets in the meters memory. Time-and-date-stamping meets Good Laboratory Practice (GLP) standards. The pH 600 meters offer the latest in calibration capabilities including up to 6 calibration points, a user-settable calibration due alarm, and up to 15 buffer options with auto buffer recognition of USA, NIST, DIN, and PWB standards. The infrared IrDA wireless technology makes PC downloading more convenient and easier. Dual power up allows you to use batteries while out in the field or the optional AC power adapter while in the lab. As always, our waterproof meters are IP67-rated for both dust and water intrusion. Even with no probes attached! |
These waterproof handheld meters feature
a –2.00 to 19.99 pH range expandable to 0.001 pH resolution. Combined with accuracies up to ±0.002 pH, these meters provide a new benchmark in our pH meter line.
|
|
Hayward - Simplex Plastic Basket Strainers |
When pipeline system components
require protection from dirt and debris and the line can be shut down for basket cleaning, a HAYWARD® All Plastic Simplex Basket Strainer is the ideal choice. Unwanted particles are
removed as the process media passes through a perforated strainer basket contained inside the strainer body. The basket traps the unwanted material while allowing the process media to flow
freely. |
 Continuous
Duty Rocking Piston Diaphram Air Pump
The TUF Pump is a 1/20 horsepower, continuous duty, rocking piston diaphragm air pump for use in pressure or vacuum
applications. Its sealed bearings motor requires no lubrication. It can be used as an air supply for bubbler type liquid level controls requiring constant 24/7 operation. |
|
|
TOP VALVE - Back Pressure Valves And Pressure Relief Valves  Back
Pressure Valves and Pressure Relief Valves named Top Valve. A new line of diaphragm style, has been introduced by Primary Fluid Systems Inc.. New features include a completely adjustable pressure
range of 0-150 PSIG and a built-in air release to reduce priming difficulties with metering pumps.Top Valve Back Pressure Valves and Pressure Relief Valves are available in seven sizes, 1/4" through 2" NPT and eight (8) materials of wetted construction. The seat design of this new line of valves greatly extends the normal life expectancy of the diaphragm. |
|
|
Extruder Rupture Disks  Extruder Rupture
Disks are designed for reliable emergency relief of excess pressure since they instantaneously rupture at a specific predetermined pressure range. Skylark
Controls model CBP Extruder Rupture Disk is designed specifically for use in plastic extruders. Each assembly consists of a stainless steel body and rupture disk. A rupture disk may be specified
for primary relief in applications where pressure buildup can occur so rapidly that the response time of a relief valve is inadequate, such as in a polymerization reaction vessel.
See Complete Product Information | Request More Information |
|
|
Melt Pressure Gauges
|
Melt Pressure Gauges from ONEhalf20 are totally mechanical devices. They offer ease of installation and maintenance. In addition these gauges are ideally suited to processors who require only visual indication of melt pressure. |
|
Low Cost Ultrasonic Sensors  Massa Products introduces the M-300
Family of RoHS compliant Ultrasonic Sensors that incorporate state-of-the-art ultrasonics and microprocessor technology to provide low cost precision non-contact distance measurement for factory
automation or industrial process control. The M-300 Sensors stand out over all other systems because of their affordability while providing extraordinary ease of operation, genuinely user-friendly
software, versatility in user-controlled outputs, narrow beam sound pulses at user-selected rate (or it can be software triggered), processes return echoes, and produces several outputs dependent
on the position of the target.Operating from 12 to 24 VDC, the M-300 Family includes several sensor models that operate at different ultrasonic frequencies, which produce detection ranges from as close as 4 inches (100 mm) to greater than 15 feet (4.5 meters). A linear output of 0 to 10 VDC is provided, which is proportional to the measured distance to the target from the minimum detection distance to the nominal maximum target distance specified for the particular M-300 model. See Complete Product Information | Request More Information |
|
|
Capacitance Level Control
CAP Capacitance Level Control detects the presence or absence of material by sensing a change in capacitance caused by the difference in dielectric
constant of the vessel material and air. To detect these small changes, the CAP series sensors use a unique detection circuit that operates at a relatively low frequency level (6 KHz). Unlike
other capacitance sensors, the operating frequency of the CAP Capacitance Level Control series is well below the RF level and not subject to FCC regulation. |
Thermo
Electron Corporation's "CAP" Series Capacitance Level Control is designed for point level monitoring of solids, fluids or slurries in bins, vessels and chutes. The CAP Capacitance Level Control
can eliminate spills, material waste, and down time by preventing bin overflows, plugged chutes and empty bins. The CAP Capacitance Level Control works
equally well as a high or low level indicator in plastics, food, chemicals, mineral slurries, or other materials. |
|
"Minitwist" - MTFC - Automatic Self-Cleaning Filtration System  “Minitwist” Model
MTFC is a fully automatic, self-cleaning filtration system for flows of 0 - 100 US GPM (23M3/H). It removes dirt as fine as 20 micron, and uses a very small amount of water during cleaning process.
In filtration mode, flow is from bottomof filter to inside of screen, and out. During cleaning mode, rotating nozzles collect dirt removed from screen by reverse flow, and sends it out through
top of filter. Backwash process takes only 5 seconds.• Fully automatic filtration system • Self cleaning, using system water only • Corrosion resistance materials • Easy to install. Inlet, Outlet and Drain • It takes only 5 seconds for backwash • Quick opening clamp for inspection • Virtually maintenance free See Complete Product Information | Request More Information |
|
|
Plastic Butterfly Valves |
|
|
Compact Multi-Purpose Controllers  Omron
Canada Inc. is proud to introduce the CP1 family of compact, multi-purpose
controllers. With prices starting from $295, these controllers contain
value-leading features unmatched in the automation industry. All CP1
controllers support Function Block and Structured Text programming with
over 400 built-in instructions including PID, PID with Auto-Tune and
Floating Point math to suit the most demanding applications. In addition
to the built-in USB port for fast program downloading and monitoring,
these units come standard with a single 0-10 V analog input for reading
process signals and a memory cartridge slot to easily store or download
programs and process variables without the need of a personal computer.
All CP1 units have integral 100kHz high-speed counter inputs and 100kHz
pulse outputs for positioning/speed control applications with clearly
marked terminals indicated by bright LED displays for fast and easy
installations.See Complete Product Information | Request More Information |
|
|
Digital Signal Conditioner With TEDS-Tag Auto Identification |
CellMite is a compact digital
signal conditioner that connects directly to a standard strain-gage-based load cell, extensometer, or pressure sensor and simulataneously generates a serial output for connection to a PC as
well as a +/-10V analog output.