December 4, 2007

Drum Heaters
Drum Heaters are a used to control temperatures on a variety of pails or drums where maintaining viscosity and keeping the contents fluid are important. Drum Heaters provide uniform heat and prevent scorching or degradation of sensitive materials.

Drum Heaters also provide freeze protection and are available with fixed or adjustable thermostats for various applications. Common voltages and sizes are available from stock but custom designs can be manufactured to suit your application.
>> Learn More | >> Request Catalog

NSPE/PEI New Product Award
New and improved products stimulate the life and growth of our country. These benefits result from research and development to which engineers make their unique contribution. This competition recognizes the results of those efforts and the foresight of the companies whose aggressive policies bring new products to the marketplace.

The purpose of the PEI New Product Award program is to recognize the full spectrum of benefits that come from the research and engineering of new products. These include added employment, economic development, strengthening of the nation's competitive position internationally, and contribution to the public's standard of living.
>> Learn More | >> Request Catalog

Immersion Temperature Sensors/Probes
Fast response with spring loading.

Immersion Temperature Sensors/Probes are used to measure teh temperature of fluids or gases in pipes.

We spring load these Immersion Temperature Sensors/Probes to provide a good thermal contact with the base of the mating thermowell for fast and accurate measurements. The temperature sensor which is PC board mounted for better reliability is potted in heat transfer compound for rapid response and vibration protection. Our molded case with hinged cover is easy to install.

Immersion Temperature Sensors/Probes are designed to accept a 2-wire transmitter.
>> Learn More | >> Request Catalog

pH and Conductivity Instrumentation
Myron L Company is proud of the trust our handheld instruments and monitor/controllers have earned in the past. Myron L Company's product line has evolved to a new level of outstanding performance and value in analytical
instruments: the Ultrameter II series from Myron L Company.

Designed for pH and conductivity applications, while priced like affordable single-parameter instruments, the Ultrameter II from Myron L Company does the job of three, four or even six instruments.
>> Learn More | >> Request Catalog

New Non-Contacting Flow Meter
The new DFM 4.0 Doppler Flow Meter from Greyline Instruments measures flow from outside a pipe. The strap-on ultrasonic sensor mounts on any pipe ½" ID or larger. Greyline recommends the DFM 4.0 for “difficult” liquids like
wastewater, sludge, slurries, abrasives or any liquid with bubbles or
suspended solids. Calibration and start-up is simple with the built-in
3-button keypad.

Standard features include a large 4-digit display, a 16-digit totalizer,
isolated 4-20mA output and 3 control relays. VFD interference suppression is
automatic for pump station applications. Options include a built-in 50,000
point data logger and reporting system with RS232 output and Windows
software, intrinsically safe and high temperature sensors.
>> Learn More | >> Request Catalog

TOP VALVE - Back Pressure Valves And Pressure Relief Valves
Back Pressure Valves and Pressure Relief Valves named Top Valve. A new line of diaphragm style, has been introduced by Primary Fluid Systems Inc.. New features include a completely adjustable pressure range of 0-150 PSIG and a built-in air release to reduce priming difficulties with metering pumps.

Top Valve Back Pressure Valves and Pressure Relief Valves are available in seven sizes, 1/4" through 2" NPT and eight (8) materials of wetted construction. The seat design of this new line of valves greatly extends the normal life expectancy of the diaphragm.
>> Learn More | >> Request Catalog

Continuous Duty Rocking Piston Diaphram Air Pump
The TUF Pump is a 1/20 horsepower, continuous duty, rocking piston diaphragm air pump for use in pressure or vacuum applications. Its sealed bearings motor requires no lubrication. It can be used as an air supply for bubbler type liquid level controls requiring constant 24/7 operation. Each pump is able to run non-stop for up to 10,000 hours provided it is used with an Ingram BK-10, BK-20 or BK-30 Bubbler Kit. NOTE: For continuous 24/7 operation, we recommend a yearly pump rebuild using the TUF Pump Rebuild Kit.
>> Learn More | >> Request Catalog

Sethco Self Priming Magnetic Drive Seal-less Centrifugal Pumps
Sethco magnetic drive, seal-less pumps are precision designed
to meet the demands of a wide range of OEM, chemical and
industrial applications. These pumps can be used for highly
corrosive or mild chemicals, acids or solvents.

No shaft seal is used or required on these magnetically driven pumps. The superior seal-less, magnetic-drive design provides a reliable, smooth running, vibration-free pump that delivers high flow and pressure.
>> Learn More | >> Request Catalog

Melt Pressure Gauges
Melt Pressure Gauges from ONEhalf20 are totally mechanical devices that offer ease of installation and maintenance. These melt pressure gauges are ideally suited to processors who require only visual indication of melt pressure.

Melt Pressure Gauges from ONEhalf20 are available in two unique styles. The CTG style features a 6" rigid stem and 30" of flex capillary. The RTG style has only a 6" rigid stem. Other configurations of these two styles are also available.
>> Learn More | >> Request Catalog

Extruder Rupture Disks
Extruder Rupture Disks are designed for reliable emergency relief of excess pressure since they instantaneously rupture at a specific predetermined pressure range. Model CBP Extruder Rupture Disk is designed specifically for use in plastic extruders. Each assembly consists of a stainless steel body and rupture disk. A rupture disk may be specified for primary relief in applications where pressure buildup can occur so rapidly that the response time of a relief valve is inadequate, such as in a polymerization reaction vessel.
>> Learn More | >> Request Catalog

Shockwatch Shockswitch RFID
Increase employee safety while decreasing facility/product damage with Shockswitch RFID—A wireless way to comply with OSHA regulations.

Using state-of-the-art wireless technology, Shockswitch RFID is a real-time link between a lift truck in the plant and a PC in the office. Shockswitch RFID can transform how a company collects data to augment OSHA compliance regarding forklift operation while also monitoring damage to equipment and facility.
>> Learn More | >> Request Catalog

Indoor Air Quality Meters
TSI's IAQ-CALC™ Indoor Air Quality Meters are outstanding instruments for investigating and monitoring indoor air quality (IAQ). Indoor Air Quality Meters Model 7515 are a cost-effective meter for carbon dioxide (CO2) measurements.
>> Learn More | >> Request Catalog