February 12, 2008

Drum Heaters
Drum Heaters are a used to control temperatures on a variety of pails or drums where maintaining viscosity and keeping the contents fluid are important. Drum Heaters provide uniform heat and prevent scorching or degradation of sensitive materials.

Drum Heaters also provide freeze protection and are available with fixed or adjustable thermostats for various applications. Common voltages and sizes are available from stock but custom designs can be manufactured to suit your application.
>> Learn More | >> Request Catalog

Melt Pressure Gauges
Melt Pressure Gauges from ONEhalf20 are totally mechanical devices that offer ease of installation and maintenance. These melt pressure gauges are ideally suited to processors who require only visual indication of melt pressure.

Melt Pressure Gauges from ONEhalf20 are available in two unique styles. The CTG style features a 6" rigid stem and 30" of flex capillary. The RTG style has only a 6" rigid stem. Other configurations of these two styles are also available.
>> Learn More | >> Request Catalog

Flue Gas Temperature Transmitters
Our Flue Gas Temperature Transmitters are constructed using the same technique we use in the industrial sensors we supply to power plants and heavy industries. The RTD or thermocouple is embedded in magnesium oxide, packed and sealed within a stainless steel sheath.

Because the sensor is so well protected from shock in this construction, long life is ensured, even under the most severe conditions. We incorporate a flange in our standard design in order to make mounting easy. The terminal box containing the transmitter electronics is mounted on a stand-off to minimize heat transfer from the flue gas to the electronics.
>> Learn More | >> Request Information

Webster C-Series Horizontal Pumps
Hayward builds its Webster Series C Horizontal End Suction Centrifugal pumps to stand up to the toughest industrial and commercial applications. Rugged pump bodies and beefed up internal components, along with a heavy duty motor, means your Series C Webster pump will perform reliably for years.

The requirements of continuous duty, aggressive, corrosive chemical applications are easily handled by Webster Series C Pumps. And even if your application could “get by” with a lesser pump, consider moving up to Webster…extra reliability doesn’t have to cost extra…compare price, spec’s and warranties…the choice is Webster.
>> Learn More | >> Request Information

Peristaltic Hose Pumps
Ponndorf Hose Pumps are self-priming rotating positive displacement pumps without any valves. Because of their good suction capacity of up to geodetic suction heights of hs = 8 m they do not need an elevated supply to be be emptied.

The conveying is done in an elastic hose placed along the wall of the pump housing. A rotor is installed centrically in this housing, either with two displacement rollers or shoes arranged at 180° or with three of these arranged at 120°.
>> Learn More | >> Request Catalog

Pulsation Dampeners ACCU-PULSE
Developed to remove pulsating flows from positive displacement pumps.

• increase system efficiency and pump life
• decrease maintenance and costs
• protect pipes, meters, valves and instrumentation from pulsation and vibration
• ensure meter accuracy, longevity and repeatability
  >> Learn More | >> Request Information

Non-Contacting Flow Meter
The new DFM 4.0 Doppler Flow Meter from Greyline Instruments measures flow from outside a pipe. The strap-on ultrasonic sensor mounts on any pipe ½" ID or larger. Greyline recommends the DFM 4.0 for “difficult” liquids like wastewater, sludge, slurries, abrasives or any liquid with bubbles or suspended solids. Calibration and start-up is simple with the built-in 3-button keypad.

Standard features include a large 4-digit display, a 16-digit totalizer, isolated 4-20mA output and 3 control relays. VFD interference suppression is automatic for pump station applications. Options include a built-in 50,000 point data logger and reporting system with RS232 output and Windows software, intrinsically safe and high temperature sensors.
>> Learn More | >> Request Information

Vortex A/C - Vortex Cooler from Pelmar Engineering
Avoid any downtime, with the most affordable, reliable, and easiest to install thermal protection product available for electrical enclosures! Just as quiet as an air conditioner (about 62 dBA), the Vortex A/C; noise level is 73% less than other conventional, vortex type cabinet coolers. When the thermostatically-controlled Vortex A/C is operating, the decibel level is about the same as normal human conversation!

This next generation, Vortex Cooler features an integral mechanical thermostat to conserve energy and maintain enclosure temperatures within a range of 80° to 90°F. Requiring only a compressed air supply to operate, the UL listed Vortex A/C quickly installs in a 1.5" knockout hole to keep electrical control panels cool, clean and protected.
>> Learn More | >> Request Information

Extruder Rupture Disks
Extruder Rupture Disks are designed for reliable emergency relief of excess pressure since they instantaneously rupture at a specific predetermined pressure range. Model CBP Extruder Rupture Disk is designed specifically for use in plastic extruders.

Each assembly consists of a stainless steel body and rupture disk. A rupture disk may be specified for primary relief in applications where pressure buildup can occur so rapidly that the response time of a relief valve is inadequate, such as in a polymerization reaction vessel.
>> Learn More | >> Request Catalog

Exergen Infrared Temperature Sensors
Exergen is a world leading manufacturer of Infrared Temperature Sensors. They hold the patent to the world's only self powered IRt/c and they offer 300 models of sensors (including powered with full scale linearization).

IRt/c's can be used to measure the temperature of moving objects and product temperature (free of contamination and without damaging the product) with a faster response time than ordinary contact sensors and with a longer lifetime! We are here to help you find solutions to your non-contact temperature measurement needs.
>> Learn More | >> Request Information

Indoor Air Quality Meters
TSI's IAQ-CALC™ Indoor Air Quality Meters are outstanding instruments for investigating and monitoring indoor air quality (IAQ). Indoor Air Quality Meters Model 7515 are a cost-effective meter for carbon dioxide (CO2) measurements.

• Low-drift NDIR CO2 sensor for stable, accurate readings
• Sampling function records multiple point measurements
• Ergonomic, overmolded case design
• Verify building HVAC system performance
• Examine building IAQ conditions to optimize worker productivity

  >> Learn More | >> Request Catalog

High Capacity Ball Valves
Chemline HC Series High Capacity Ball Valves are the only truly large port 6" ball valve manufactured to date in PVC, Polypropylene and PVDF. Most others offer a 4" valve with ends increased to 6" size. This valve is suitable for sewage, mild slurry or vacuum lines where an unobstructed flow path is required.

• Large Port, Compact Dimensions
  
• Easy Maintenance, Light Weight
  
• No Cavity between Body and Ball
  
• Cushioned Teflon® Ball Seats
  
• Teflon® Stem and Trunion Bearings
  
• Available Flanged to 8"
  >> Learn More | >> Request Catalog

SonaTech Sonic Level Measuring Systems
The Ramsey SonaTech sonic level indicator can accurately determine the level of bulk solids or liquids in a given bin, tank or other container. The state-of-the-art SonaTech system provides more penetrating power because it operates in the 5-30 kHz range. That means superior performance in dusty, turbulent or steamy atmospheres.

Whatever your application, Ramsey quality assures cost-effective sonic measurement. SonaTech Sonic Measuring Systems from Ramsey can accurately determine the level of bulk solids or liquids in a given bin, tank or other container.
>> Learn More | >> Request Catalog